Assessment of process parameters and performance enhancement through a novel suction flushing technology in RµEDM

Abstract

Reverse micro electro-discharge machining (RµEDM) is a promising and cost-effective technology for fabricating unconventional shaped single and arrayed micro-pins of high aspect ratio. However, dimensional inaccuracies, poor surface finish and long machining time are of great concern. An experimentbased detailed investigation of process parameters for analyzing various machining responses has been performed in this article. Taguchi’s L16 orthogonal array design of experiments has been used to frame out the experimental runs. Discharge voltage, capacitance and feed rate have been considered as process parameters whereas, material removal rate, taper root angle, surface roughness and machining time as responses for the fabrication of a single micro-pin. Additionally, the feasibility of a novel high-pressure suction flushing technology implemented for RµEDM has been demonstrated. The performance of this technology is verified for better surface quality and lesser machining time. It is observed that by using the proposed suction technology, along with the suitable parametric settings, the micromachining time significantly improved (~20%) while fabricating an arrayed micro-pins in elliptical cross-sections profile.