INSTITUTIONAL DIGITAL REPOSITORY

Browsing by Author "Mukherjee, S."

Browsing by Author "Mukherjee, S."

Sort by: Order: Results:

  • Shittu, J.; Pole, M.; Cockerill, I.; Sadeghilaridjani, M.; Reddy, L. V. K.; Manivasagam, G.; Singh, H.; Grewal, H. S.; Arora, H. S.; Mukherjee, S. (2021-06-09)
    Bioimplants are susceptible to simultaneous wear and corrosion degradation in the aggressive physiological environment. High entropy alloys with equimolar proportion of constituent elements represent a unique alloy design ...
  • Arora, H. S.; Mridha, S.; Grewal, H. S.; Singh, H.; Hofmann, D. C.; Mukherjee, S. (2021-09-22)
    We demonstrate the refinement and uniform distribution of the crystalline dendritic phase by friction stir processing (FSP) of titanium based in situ ductile-phase reinforced metallic glass composite. The average size ...
  • Perumal, G.; Grewal, H.S.; Pole, M.; Reddy, L.V.K.; Mukherjee, S.; Singh, H.; Manivasagam, G.; Arora, H.S. (2020-03-09)
    The leaching out of toxic elements from metallic bioimplants has serious repercussions, including allergies, peripheral neuritis, cancer, and Alzheimer’s disease, leading to revision or replacement surgeries. The development ...
  • Nair, R.B.; Arora, H.S.; Mukherjee, S.; Singh, S.; Singh, H.; Singh, H.S. (2019-05-20)
    Cavitation erosion and corrosion of structural materials are serious concerns for marine and offshore industries. Durability and performance of marine components are severely impaired due to degradation from erosion ...
  • Sharma, V. R.; Kumar, R.; Mukherjee, S.; Aguilera, E. F.; Shuaib, M.; Singh, P. P.; Yadav, A.; Dubey, R.; Appannababu, S.; Rivera, J. C. M.; Kumar, S.; Singh, B. P.; Prasad, R. (2021-08-22)
    Absolute cross sections for 22 fissionlike fragments concerning their decay mode via independent and cumulative cross sections have been measured at four projectile energies, i.e., 82.2 ± 0.8, 79.18 ± 0.82, 76.8 ± 1.2, ...
  • Grewal, H.S.; Arora, H.S.; Singh, H.; Agrawal, A.; Mukherjee, S. (2016-11-23)
    In the present work, the slurry erosion behavior of friction stir processed (FSPed) hydroturbine steel (CA6NM) was investigated. For comparison, the erosion performance of unprocessed CA6NM steel was evaluated under ...
  • Kumar, R.; Sharma, V.R.; Yadav, A.; Singh, P.P.; Appanababu, S.; Aggarwal, A.; Singh, B.P.; Mukherjee, S.; Muralithar, S.; Ali, R.; Bhowmik, R.K. (2016-11-19)
    Aiming to investigate the incomplete fusion processes at low projectile energies, experiments have been carried out for the 14N + 169Tm system at ≈ 4–7 MeV/A. Excitation functions for several residues likely to be ...
  • Kumar, R.; Sharma, V.R.; Yadav, A.; Singh, P.P.; Agarwal, A.; Appannababu, S.; Mukherjee, S.; Singh, B.P.; Ali, R.; Bhowmik, R.K. (2017-12-21)
    Excitation functions of reaction residues produced in the 14N + 169Tm system have been measured to high precision at energies above the fusion barrier, ranging from 1.04VB to 1.30VB, and analyzed in the framework of the ...
  • Arora, H.S.; Grewal, H.S.; Singh, H.; Dhindaw, B.K.; McPhail, D.; Shollock, B.; Chater, R.; Mukherjee, S. (2022-12-22)
    Friction stir processing (FSP) of Mg based AE42 alloy was performed under single pass as well as double pass conditions. The evolution of microstructure was investigated using electron back scatter diffraction (EBSD) ...
  • Arora, H.S.; Grewal, H.S.; Veligatla, M.; Singh, H.; Mukherjee, S. (2022-12-26)
    An in situ composite coating on pure aluminium substrate was prepared by novel microwave processing of iron based metallic glass powder precursor. The microstructure obtained after processing comprised of a molybdenum rich ...
  • Sharma, V.R.; Kumar, R.; Singh, B.P.; Aguilera, E.F.; Shuaib, M.; Mukherjee, S.; Dubey, R.; Singh, P.P.; Kumar, S.; Appannababu, S.; Yadav, A.; Sharma, M.K.; Morales-Rivera, J.C.; Prasad, R. (2019-12-11)
    Present paper reports the mass distribution of fission events in the 14N+181Ta reaction at four different projectile energies viz., 82.2 ± 0.8, 79.18 ± 0.82, 76.8 ± 1.2 and 72.9 ± 0.91 MeV using recoil catcher technique ...
  • Nair, R. B.; Selvam, K.; Arora, H. S.; Mukherjee, S.; Singh, H.; Grewal, H. S. (2021-10-14)
    High entropy alloys (HEAs) represent a new paradigm of structural alloys comprising of multiple principal elements in equimolar or near-equimolar concentration. The superior corrosion and oxidation resistance of HEAs at ...
  • Grewal, H.S.; Arora, H.S.; Agrawal, A.; Singh, H.; Mukherjee, S. (2016-08-11)
    Slurry erosion is a major problem in hydroturbines and other fluid machineries wherein erodent particles entrained in carrier fluid impinge upon the target surface to cause its degradation. Several possible alternative ...
  • Arora, H.S.; Grewal, H.S.; Mridha, S.; Singh, H.; Mukherjee, S. (2016-08-10)
    Structural changes in a bulk metallic glass subjected to high-strain plastic deformation was investigated. A zirconium-based bulk metallic glass was friction stir processed at different tool rotational speeds. The alloy ...
  • Kumar, S.; Giri, P.K.; Kumar, R.; Yadav, A.; Ali, R.; Appannababu, S.; Agarwal, A.; Mukherjee, S.; Singh, P.P.; Singh, V. R.; Singh, B.P.; Dutta, S. (2022-09-27)
    Studies in the past have demonstrated that complete fusion and incomplete fusion (ICF) dynamics are both significant just above the Coulomb barrier, yet the dynamics of ICF are elusive since they are so complex below 10 ...
  • Arora, H.S.; Grewal, H.S.; Singh, H.; Dhindaw, B.K.; Mukherjee, S. (2016-11-28)
    The liquid impingement erosion behavior of a zirconium-based bulk metallic glass (BMG), Zr44Ti11Cu10Ni10Be 25, was evaluated in this study. For comparison, commonly used hydroturbine steel was evaluated under the same test ...
  • Arora, H.S.; Grewal, H.S.; Singh, H.; Mukherjee, S. (2016-08-18)
    The slurry erosion behavior of a zirconium based bulk metallic glass, Zr44Ti11Cu10Ni10Be25, was evaluated in this study. Slurry erosion tests were carried out using a non-circulating type test rig at impingement angles of ...