Microstructure and mechanical properties of cold-spray coatings are usually required in order to explore the potential industrial application of the latter. This article demonstrates the successful formulation of Ni-20Cr ...

High-velocity-oxy-fuel (HVOF) spray and detonation-gun (D-gun) spray techniques were used to deposit Ni–20Cr coatings on a commonly used boiler steel ASTM-SAE 213-T22. The specimens, with and without coating, were subjected ...

Inhibitors and oxide additives have been investigated with varying success to control high-temperature corrosion. Effect of Y2O3 on high-temperature corrosion of Superni 718 and Superni 601 superalloys was investigated ...

High temperature corrosion of metals and alloys can be controlled by the use of inhibitors. In this work, the role of a superficially applied CeO2 coating to combat high temperature corrosion of some super alloys such ...

High-velocity oxy-fuel (HVOF) sprayed coatings have the potential to enhance the high-temperature oxidation, corrosion, and erosion-corrosion resistance of boiler steels. In the current work, 75 pct chromium carbide-25 ...

The high-velocity oxy-fuel (HVOF) spray technique was used to deposit Ni-20Cr coating on a commonly used boiler steel ASTM A213 347H. The specimens with and without coating were exposed to the super heater zone of a thermal ...

High temperature corrosion accompanied by erosion is a severe problem, which may result in premature failure of the boiler tubes. One countermeasure to overcome this problem is the use of thermal spray protective coatings. ...

Detonation gun-sprayed coatings are known for their high density, high bond strength, moderate substrate heating, superior surface finish, better wear/corrosion resistance, and low cost. In this study, detonation ...

Superalloys have been used successfully to resist high temperature corrosion; however, they still lack resistance to corrosion during longer periods of use. Inhibitors and fuel additives have been used to reduce corrosion ...

Inhibitors and fuel additives have been used with varying success to combat high temperature corrosion of metals and alloys. In this work, the role of a superficially applied SnO2 coating to combat high temperature corrosion ...