Abstract:
Plasma vertical stabilization is a serious concern during Tokamak operation, which may cause melting of invessel components. To improve the vertical stability of plasma, pure copper layer/cladding of 3 mm-thickness
has been recommended. Owing to this large thickness, development of such coatings is a challenging task. In this
work, Cu-claddings of thickness 1 mm and 3 mm were developed using copper powder of particle sizes < 63 μm
and > 63 μm respectively by laser cladding process on an in-vessel component material (SS316L). The deposited
claddings were characterized by X-ray diffraction (XRD) and X-ray radiography analysis. The cross-sectional
microstructure of both the claddings was characterized with the help of scanning electron microscope (SEM) and
optical microscope (OM). Various mechanical properties such as micro-hardness, tensile strength, % elongation,
adhesion strength, yield strength, Young’s modulus, nano hardness and density were evaluated for both the
claddings and compared. Hardening was observed along the interface and HAZ of the cladded steel, which may
be attributed to the diffusion of carbon from the substrate. Results of the study indicate that laser cladding could
be a feasible solution to develop claddings for advanced fusion reactors, as well as, for manufacturing coppercast iron canisters; however, further improvements in the properties need to be done by further refining the
process parameters.
