Abstract:
Analysis of measured in-cylinder pressure data provides various parameters that characterize engine combustion process. Advanced engine control technologies use cylinder pressure based combustion parameters for closed loop control. Four step signal processing (i) absolute pressure correction, (ii) crank angle position referencing, (iii) cycle averaging and (iv) filtering is typically applied to get sufficiently accurate cylinder pressure data for an engine cycle. This paper focuses on cycle averaging and filtering of in-cylinder pressure signal from a conventional compression ignition (CI) engine. Experiments are conducted at different engine load and compression ratios at 1500 rpm. The in-cylinder pressure trace of 2500 consecutive engine cycles is recorded and analyzed. Effect of in-cylinder pressure signal noise and cyclic variation on combustion analysis is investigated. A method based on standard deviation of pressure and pressure rise rate is used to find sufficient minimum number of engine cycles to be recorded for averaging to get reasonably accurate pressure data independent of cyclic variability.
