Comparative analysis of residual pressure drop behavior between electrostatically assisted flat based and pilot pulse jet filter unit using conductive filter media

dc.contributor.author	Dutta, S.
dc.contributor.author	Mukhopadhyay, A.
dc.contributor.author	Choudhary, A.K.
dc.contributor.author	Reddy, C C.
dc.date.accessioned	2024-05-06T07:19:54Z
dc.date.available	2024-05-06T07:19:54Z
dc.date.issued	2024-05-05
dc.identifier.uri	http://dspace.iitrpr.ac.in:8080/xmlui/handle/123456789/4407
dc.description.abstract	The present study aims at comparing the pressure drop behavior of three different needle-punched polyester conductive materials, viz. PTFE coated media, stainless steel fibre blended with PET media and stainless steel fibre scrim media. This comparison is done on a laboratory-based electrostatically assisted pulse-jet flat media test rig with the pilot filter unit, which is closer to the industrial set-up. The materials are investigated using fly ash aerosol, pre-charged at three different levels of charge, viz. 4 kV, 8 kV and 12 kV. The interpretations reveal that the flat media test rig is observed to exhibit lower residual pressure drop for all the investigated materials.	en_US
dc.language.iso	en_US	en_US
dc.subject	Conductive filter media	en_US
dc.subject	Correlation behavior	en_US
dc.subject	Dust charge	en_US
dc.subject	Dust concentration	en_US
dc.subject	Residual pressure drop	en_US
dc.title	Comparative analysis of residual pressure drop behavior between electrostatically assisted flat based and pilot pulse jet filter unit using conductive filter media	en_US
dc.type	Article	en_US