• Friction stir processing of mild steel to enhance its surface hardness 

  Grewal, H.S.; Singh, H.; Agrawal, A.; Arora, H.S. (2022-12-22)

  Friction stir processing (FSP) is a material processing technique recognized to enhance the mechanical properties of the material owing to micro-structural refinement. In the present study, the feasibility of the use of ...
• A section approach to a traffic flow model on networks 

  Gupta, A.K. (2022-12-22)

  The development of real time traffic flow models for urban road networks is of paramount importance for the purposes of optimizing and control of traffic flow. Motivated by the modeling of road networks in last decade, ...
• A faster algorithm to update betweenness centrality after node alteration 

  Goel, K.; Singh, R.R.; Iyengar, S.; Sukrit (2022-11-18)

  Betweenness centrality is a centrality measure that is widely used, with applications across several disciplines. It is a measure which quantifies the importance of a vertex based on its occurrence in shortest paths between ...
• Real options as a decision-making tool in climate finance evaluated with a case study on CCS 

  Bose, A.; Badhawan, A.D.; Mukherjee, A.; Bandyopadhyay, S. (2022-11-11)

  Climate action is a challenging task and uncertainties in climate science make decision making extremely difficult. In this paper we evaluate the role that Real Options can play in helping decision making towards climate ...
• The contextual interference effect in visual feature binding: What does it say about the role of attention in binding? 

  Jaswal, S.; Logie, R.H. (2022-09-15)

  The effects of blocked versus mixed presentation were tested on visual feature binding, assuming that blocked presentation enhances focused attention, whilst mixed presentation recruits extra attentional resources for ...
• A much-needed mechanism and reaction rate for the oxidation of phenols with ClO2: A joint experimental and computational study 

  Aguilar, C.A.H.; Narayanan, J.; Manoharan, M.; Singh, N.; Thangarasu, P. (2022-09-15)

  The oxidation of phenols with chlorine dioxide, a powerful means to eliminate phenol pollutants from drinking water, is explored. Kinetic experiments reveal that 2,4,6-trichlorophenol exhibits a lower oxidation rate than ...
• India's ranking in materials research 

  Surappa, M.K. (2022-09-15)
• Molecular dynamics simulation of carbon nanotubes 

  Sharma, S.; Chandra, R.; Kumar, P.; Kumar, N. (2022-09-15)

  The elastic properties of single-wall carbon nanotubes (SWCNTs) have been determined using molecular dynamics (MD) simulation. The mechanical properties of three types of SWCNTs, viz., armchair, zigzag, and chiral nanotubes, ...
• Corrosion behavior of a Mg alloy AE42 subjected to friction stir processing 

  Arora, H.S.; Singh, H.; Dhindaw, B.K. (2022-09-09)

  The goal of the current investigation was to analyze the influence of friction stir processing (FSP) on the corrosion behavior of a magnesium alloy, AE42. The alloy was friction stir processed under a wide range of FSP ...
• Recent advances in thermal wave detection and ranging for nondestructive testing and evaluation of materials 

  Mulaveesala, R.; Ghali, V.S.; Arora, V.; Siddiqui, J.A.; Muniyappa, A.; Takei, M. (2022-09-09)

  Thermal Wave Detection and Ranging (TWDAR) for non-destructive testing (TNDT) is a whole field, non-contact and non-destructive inspection method to reveal the surface or subsurface anomalies in the test sample, by recording ...
• Theory, modeling and simulations for thermal wave detection and ranging 

  Mulaveesala, R.; Ghali S.V. Arora, V.; Siddiqui, J.A.; Muniyappa, A.; Takei, M. (2022-09-09)

  Active infrared thermography for nondestructive testing and evaluation is a rapidly developing technique for quick and remote inspection of subsurface details of test objects. Sinusoidal modulated thermal wave imaging such ...
• An amide based dipodal Zn2+ complex: Nano-molar detection of HSO4- in a semi-aqueous system 

  Fegade, U.; Sharma, H.; Tayade, K.; Attarde, S.; Singh, N.; Kuwar, A. (2022-09-09)

  A new chromogenic dipodal Zn2+ complex (4) bearing an amide group has been synthesized. The anion binding profile of this sensor was investigated with fluorescence and UV-Vis spectroscopy. The receptor 4 has high affinity ...
• Cryogenic treatment of materials: cutting tools and polymers 

  Gill, S. S.; Singh, H. (2021-11-22)

  Cryogenic treatment (CT), a supplementary process to conventional heat treatment process, is the process of deep-freezing materials at cryogenic temperatures to enhance the mechanical and physical properties of ...
• Extraction and transport behaviour of tripodal receptor: selective recovery of Ni2z and processing into nickel nanoparticles 

  Kumar, M.; Singh, N.; Singh, H. (2021-11-22)

  A tripodal receptor bearing the S,N donor sites was investigated for the extraction and transportation of metal ions. The receptor showed selectivity towards nickel ion as it could extract 87% of nickel ion from aqueous ...
• High temperature oxidation behavior of a novel Ni-20Cr alloy powder coating on T22 steel 

  Kumar, M.; Singh, H.; Singh, N. (2021-11-22)

  Ni-20Cr alloy powder synthesized by the investigators was deposited on T22 boiler steel by high velocity oxy-fuel (HVOF) spraying process. High temperature oxidation behavior of uncoated and coated samples was studied ...
• Synthesis and deposition of Ni–20Cr powder using cold spraying 

  Kumar, M.; Singh, H.; Singh, N. (2021-11-22)

  Chromium nanoparticles were first synthesised using planetary ball mill in wet environment. The particle size was found to be nearly 60 nm, which was confirmed by X-ray diffraction (XRD), scanning electron microscopy ...
• X-Ray diffraction study of cold sprayed Ni-20Cr and Ni-50Cr coatings on boiler 

  Bala, N.; Singh, H.; Prakash, S. (2021-11-22)

  X-ray diffraction (XRD) is a versatile, non-destructive technique that reveals detailed information about the chemical composition and crystallographic structure of materials. In this work Ni-20Cr and Ni-50Cr coatings ...
• Categorization of indicators for sustainable manufacturing 

  Joung, C. B.; Carrell, J.; Sarkar, P.; Feng, S. C. (2021-11-13)

  The manufacturing industry is seeking an open, inclusive, and neutral set of indicators to measure sustainability of manufactured products and manufacturing processes. In these efforts, they find a large number of stand-alone ...
• Electronic properties of anodic bonded graphene 

  Deepika; Balan, A.; Shukla, A.; Walter, E.; Kumar, R. (2021-11-13)

  Here, we report electronic properties of graphene field-effect transistor in a magnetic field of 9.0 tesla. Raman spectroscopy on graphene sample prepared by anodic bonding method shows it to be of the highest quality. ...
• Using X-ray diffraction for studying the effect of modulation and machining parameters on deformation level in brass particulate produced by modulation assisted machining 

  Joshi, R. S.; Singh, H. (2021-11-13)

  In present investigation, effect of modulation and machining parameters on deformation level of the chips produced during modulation assisted machining (MAM) has been studied. It is shown that disruption in tool-chip ...

View more